Brocade Stencil Cork Board

 

Shopping List

  • 24”x36” cork board
  • 24”x36” frame (take the glass out)
  • Black acrylic paint
  • Stencil sponge
  • 12”x12” Crafter’s Workshop Brocade Stencil
  • Life is a journey….vinyl
  • 5”x7” Floating Frame
  • Scrapbook paper
  • Glass Gems and thumb tacks
  • E-6000 Glue & Glue Gun
  • Diamond Glaze

Instructions

 1. Take your cork board, empty paint on a paper plate.  Using a sponge, blot paint on the stencil image.  You’ll position in the top left corner, top right corner and center below.  Allow to dry.

 2.  Adhere vinyl on the front of floating frame.  Size up scrapbook paper , cut and adhere on to the back edges.  Use a screwdriver to take out the hanger (you’ll want to make sure it sits flat on the board).

 3.  Once the cork board is dry, pop it into the 24”x36” frame. 

 4.  Take E-6000 and glue down the 5”x7” floating frame on the   center of the board.  Let dry.

 5.  For decorative tacks, take glass gems (use any size you like), and decorate using scrapbook paper.  Take the paper, trace the size of the gem, cut out, and use a drop of Diamond Glaze on the flat side of the gem.  Let dry. 

 6. Take your glue gun, and adhere glass gem to thumb tack, repeat until you have enough to use.

 

 

 

 
Craft Warehouse - Copyright 2010 - All Right Reserved