Shopping List

• Black & white tile coaster set
• Alcohol Ink
• Stamp of your choice
• Vinyl Bird
• Mod Podge
• Acrylic Sealer

 Instructions

1.  Choose an alcohol ink color for the background of your coaster. Dab the ink on to the stamp of your choice and stamp the coaster. This will be permanent so make sure you are careful when stamping.

 2.  Take your vinyl bird and carefully peel off the front.  Using alcohol ink, color the bird.  Then replace the paper to the front of the bird. Slowly peel back the vinyl backing. This will be the sticky side. Press down on the bird and peel back the top layer so that the bird is on the coaster.

 3.  Over the top of all your coasters use 3 coats of Mod Podge, letting each layer dry for 30min.

 4.  After they are all dry, spray 3 coats of Acrylic Sealer giving each layer an hour to dry. Then let sit overnight.