Shopping List

• 36" board (pre-painted)
• "Stockings were hung" vinyl saying
• "Be Merry" paper collection: 1 sheet stripes, 1 sheet jolly little snowman, 1 sheet cut-outs
• Pioneer Embellishment Glue Stick
• Distress Ink, Fired Brick
• 4 Coat Hooks
• 2 spools ribbon to match papers
• Drill/screwdriver

Instructions

1. Cut three strips of the striped paper 7.5" x 12". Cut three strips of the snowman paper 7.5" x 12", making sure the snowmen are centered in the paper. Ink the long edges of all strips of paper.
2. Attach the striped paper to the bottom of the board. Use a generous amount of Embellishment Glue Stick to make it adhere. Attach the snowmen strips on top of the striped paper, approximately 1/4" up from the bottom.
3. Cut the stockings off the edges of the vinyl sheet. Save them for another project. Cut the saying apart between the words "hung" and "by". Following the package instructions, adhere the vinyl to the center of the board, just above the papers you attached in step 2.
4. Punch out the brackets. Ink the edges and attach to the board around the vinyl letters.
5. Punch out snowmen and attach on each side of the board, overlapping the striped paper.
6. Cut ribbons into 6" strips. Tie to the holes on each hook. Use a screwdriver to attach the hooks along the bottom of the board.