Linked Turquoise Necklace Project
  Shopping List
  • Eyepins (BM11126)
  • Asst. Circle & Square Links (BM11220)
  • Sun Rise Toggle (BM10210)
  • 6mm Round Turquoise (CW-410)
  • 7x9mm Barrel Turquoise (CW-412)
  • Turquoise Pendant
Basic Supplies
  • Round Nose Pliers
  • Chain Nose Pliers
  • Bent Nose Pliers
  • Side Cutters
 Linked Turquoise Necklace


Instructions

  1. Use medium eyepins and thread on one barrel and make loop on other end, repeat 28 times for a total of 29.
  2. Use small eyepins and thread on one 6mm round and make loop on other end, repeat 15 times for a total of 17.
  3. Use one eyepin and thread on the pendant make loop on other end.  
  4. Using the small links join together three round links and one square link with the roundels between each link. Repeat 5 times for 6 sets. This is the longer strand.
  5. Attach one barrel to the third small square link (in the middle of the necklace) and then add one more small square link to the other end of the barrel.
  6. Using the larger links, join one square link and two round links with the round turquoise between each link. Repeat 4 times for 5 sets, then end with one more square link. This is the smaller strand.
  7. Then to attach the pendant add one barrel to the fifth large round link and then to the sixth large round link and join the other ends to the loops on either side of the pendant.


 
Craft Warehouse - Copyright 2010 - All Right Reserved